Hansgrohe 31313831 Instruction Manual download pdf (Page 6)

Remove the plaster shield from the spout tee.

Remove the brass plug from the tee.

Three-hole models only:

Lightly lubricate the o-rings on the sealing ring us-

ing white plumbers grease.

Press the sealing ring into the spout tee.

Firmly press the spout over the sealing ring until it is

fully seated.

Tighten the screw using a 3 mm Allen wrench.

Do not overtighten the

screw.

Overtightening the screw

will deform the o-rings,

causing a leak.

3 mm

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Hansgrohe 31313831 Instruction Manual Page 6