Hansgrohe 31313831 Instruction Manual download pdf (Page 3)

Installation Considerations

For best results, Hansgrohe recommends that

this unit be installed by a licensed, profes-

sional plumber.

Please read over these instructions thoroughly

before beginning installation. Make sure that

you have all tools and supplies needed to

complete the installation.

Four-hole trim kits are for use only with rough

06646000.

Three-hole trim kits are for use only with rough

06607000.

•

Technical Information

Recommended water pressure 15 - 75 psi

Max. water pressure 147 psi

Recommended hot water temp. 120° - 140° F*

Max. hot water temp 165°F*

Flow rate – handshower 2.5 gpm max.

*Please know and follow all applicable local plumbing codes when

setting the temperature on the water heater.

The rough valve must be installed, and the

mounting surface must be nished and made

watertight before installation of this trim kit.

Four-hole models only: Protection against

backow is provided by check valve and an

automatically resetting diverter.

Keep this booklet and the receipt (or other

proof of date and place of purchase) for

this product in a safe place. The receipt is

required should it be necessary to request

warranty parts.

•

1 2 3 4 5 6 7 8 ... 15 16

No comments

Hansgrohe 31313831 Instruction Manual Page 3