Hansgrohe 12012001 Instruction Manual download pdf (Page 2)

English

Technical Information

Recommended water pressure 15 - 75 PSI

Max. water pressure 145 PSI

Recommended hot water temp. 120° - 140° F*

Max. hot water temp 176°F*

Flow rate 0.9 GPM

Flow rate - boost setting 1.5 GPM

Flow rate - bidet 2.2 GPM

Hole size in mounting surface 1⅜"

Max. depth of mounting surface 1⅝"

*Please know and follow all applicable local plumbing

codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that

this unit be installed by a licensed, professional

plumber.

• Please read over these instructions thoroughly be-

fore beginning installation. Make sure that you

have all tools and supplies needed to complete

the installation.

• Please inspect the faucet for shipping damage

before installation. Hansgrohe will not honor

claims for shipping damage after the faucet is

installed.

• For best results, the water pressure of the hot and

cold water supplies should be equal.

• The check valves should be inspected yearly, and

replaced if dirty or worn.

• Keep this booklet and the receipt (or other proof

of date and place of purchase) for this product in

a safe place. The receipt is required should it be

necessary to request warranty parts.

Tools Required / Outiles Utiles /

Herramientas Útiles

10 mm

19 mm

1 2 3 4 5 6 7 ... 23 24

No comments

Hansgrohe 12012001 Instruction Manual Page 2